4-Door UnderCloak Skid Plate Systems


Supporting Vendor
Please click the link below to view instructions (.pdf) referenced in the title of this thread.

JL 4-Door UnderCloak Skid Plate System, 3.6L, Non E-Torque

JL 4-Door UnderCloak Skid Plate System, 3.6L, E-Torque

JL 4-Door UnderCloak Skid Plate System, 2.0L, Non E-Torque

JL 4-Door UnderCloak Skid Plate System, 2.0L, E-Torque

Please assist us in our commitment to continuously improve our installation instructions. If you think information is missing, have advice to share with others, or have clearer pictures/illustrations please post them to this thread. All feedback is greatly appreciated!

Only One Rule...Please Be Cool.

If you notice a post that has been deleted, we likely implemented the idea into our published instructions.

Questions about your installation?
Please email [email protected] or call 916-631-8071

The comments in this forum do not represent official advice from MetalCloak. Users of MetalCloak products follow the advice of others at their own risk.
Last edited:


Jeep Newb
Some more clarification about how to handle the battery support/skid plate would be nice. There is no way you remove it, but the front part of the battery skid plate/support that connects to cross memeber ends up really interfering with the install. I ended up cutting the bottom of that support off as it was really stressing the battery if I just pushed it up.

Also the front engine brackets are confusing as the nuts are welded on. Some clarification that you remove those bolts and put the news down through existing nuts would be nice. And some tips to get to them. Driver side - really long extension and socket can get to them. Passenger side socket wrench from underneath worked best.